Wall block PORISTON D400

Lviv company AEROBLOK sells wall block PORISTON D400.

These are gas silicate blocks marked PORISTON D400 (density 400). The peculiarity of the shape of these blocks is that with a thickness of more than 200 mm they have a special structure of end faces, which not only facilitates installation, but also reduces glue consumption, since vertical seams can be left unfilled. In addition, these wall blocks have special "pockets" that allow you to conveniently take each block with your hands.

Aerated concrete PORISTON D400 is high-quality blocks of porous concrete with impeccable geometry. These blocks have impressive thermal insulation properties. For example, external walls built from PORISTON D400 375 blocks have the same heat retention properties as a brick wall 380 mm thick with additional insulation with a mineral wool slab or 100 mm polystyrene foam. Thus, PORISTON D400 aerated concrete allows you to get warm walls of a smaller thickness without using additional insulation.

Application of AEROC D400

Depending on the thickness, PORISTON D400 aerated concrete is used for the construction of supporting and non-supporting partitions, as well as external walls of various buildings up to 5 floors high. PORISTON D400 blocks with a thickness of 300 and 375 mm are suitable for the construction of external walls of residential buildings. And with a block thickness of less than 300 mm, they are successfully used for the construction of small houses for temporary residence (for example, summer cottages).

PORISTON D400 Masonry

The PORISTON D400 block assembly system - "groove-ridge" - provides a perfectly even masonry using a special PORISTON adhesive or another recommended manufacturer. At the same time, the joint itself forms a "thermal lock", eliminating the appearance of so-called "cold bridges" along the seam. The masonry process is quick and comfortable for builders, because the joint system serves as guides. In addition, special pockets for convenient gripping facilitate and accelerate the process of transferring and laying these aerated concrete blocks. And the precise geometry, perfectly even surface and clarity of joints provide a wall so even that it does not require additional alignment.

The PORISTON D400 wall block is a universal aerated concrete material for the construction of load-bearing and external walls in low-rise and commercial construction. PORISTON D400 aerated concrete blocks combine optimal strength, good thermal insulation and precise geometry, which ensures quick laying and minimal costs for glue and finishing.

PORISTON D400 aerated concrete can be purchased in Lviv from the AEROBLOK company - the official representative of PORISTON. The material is widely used in construction in Lviv, Chernivtsi, Ivano-Frankivsk, Ternopil and other regions of Ukraine. PORISTON D400 aerated concrete blocks are ideal for the construction of external walls, partitions and energy-efficient houses with a long service life.

A wide selection of formats allows you to choose PORISTON D400 wall gas blocks for any project:

PORISTON D400 gas blocks (75x200x610)

PORISTON D400 gas blocks (100x200x610)

PORISTON D400 gas blocks (125x200x610)

PORISTON D400 gas blocks (150x200x610)

PORISTON D400 gas blocks (250x200x610)

PORISTON D400 gas blocks (280x200x610)

PORISTON D400 gas blocks (300/200/610) and other sizes

Delivery across Ukraine is possible, taking into account current logistical conditions.