Complete transformer substations dead-end and pass-through, with a capacity of 25-630 kVA

Complete transformer substations, dead-end and pass-through, with a capacity of 25-630 kVA, are sold by the Energospecservice enterprise, order, consultation +38(096) 40-60-989, +38(04333)4-22-19.

Complete dead-end and pass-through transformer substations - KTP-1 with a capacity of 25-630 kVA, HV voltage 6 or 10 kV, LV voltage 0.4 kV are designed for receiving, transforming and distributing electrical energy of three-phase alternating current with a frequency of 50 Hz in systems with a dead-grounded neutral transformer on the lower voltage side. KTP-1 are intended for electricity supply to agricultural consumers, individual settlements and small industrial facilities in regions with a moderate climate (from -45ºС to + 40ºС). KTP-1 is installed on the simplest concrete platform of at least 400 mm.

KTP-1 is used for power supply of industrial, agricultural, communal facilities in distribution network schemes.

The normative conditions of work of KTP-1 are:

  - height above sea level - not more than 1000m;

  - the lower value of the working air temperature - minus 45 ° C;

  - the upper value of the working air temperature is plus 40 ° C.

The environment is explosive, which does not contain conductive dust, aggressive dust and steam in concentrations that destroy metals and insulation.

There are the following types of KTP-1 stand-alone dead-end transformer substations:

  - KTP-1 25kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1 40kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1 63kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1-100kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1-160kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1-250kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1-400kVA -10 (6) -0.4 cable-cable, air-cable;

  - KTP-1-630kVA -10 (6) -0.4 cable-cable, air-cable.