Buy pressure switch RD-23, Dnipro

The RD-23 pressure switch is sold by Aspectmash, LLC, consultation, order by phone number +38(097)801-54-67, +38(066)950-18-89, +38(096)418-16-56.

The RD-23 pressure relay controls the pressure of the environment in pneumatic, hydraulic and lubrication systems of various purposes.

The relay operates on compressed air, purified not coarsely to class 10 of pollution according to GOST 17433-80, or mineral lubricant with a kinetic viscosity of 4 to 400 mm²/s (cSt) with a nominal fineness of filtration no coarser than 40 microns (class 13 of purity according to GOST 17216- 71) at oil temperature from 10 to 55°C.

The RD-23 relay can be installed in any spatial position.

The design of the relay provides threaded and butt mounting.

The relay is connected to the pneumatic system using a threaded hole K1/8". With the butt-mounting method, a sealing ring must be installed in the bore of the relay base (diameter 20 mm). The relay is attached to the mounting plate with two M8 screws.

The RD23 pressure switch is connected to the electrical system using an electrical connector.

The relay is adjusted with the protective cover removed by turning the adjusting screw. The adjustable pressure value is controlled by a manometer. After completing the adjustment, it is necessary to tighten the lock nut, and then once again make sure that the adjustment is correct.

Climatic implementation of UHL and Pro relays (only for the tropics), accommodation category 4 according to GOST15150-69.